Spherical roller bearing for cement mixer gearbox PLC59-5

If you want to confirm some technical details before you order,
just need to send a message or e-mail: sale@all-bearing.com .
Then our professional sales staff will contact you within 2 hours.

Spherical roller bearing for cement mixer gearbox PLC59-5

Dimensions				Basic load rating		Weight	Bearing designation
d	D	B1	B	Dynamic (Cr)	Static (Cor)
mm				kN		kg
100	180	69	82	480	710	10.3	PLC 59-5

The following bearings are designed for use in mobile cement mixer gearboxes.The bearings are mounted onto the

main shaft of the gearbox and are offered in three basic designs: PLC 58-6, PLC 59-5, and PLC 59-10, all have a

wider outer ring, increasing the self-aligning ability of the bearing. These bearings are produced within ABEC 1

tolerance and have a C0 radial clearance.

The PLC 59-5 has a two-piece brass cage, which allows a higher operating temperature than other plastic cage

designs.The brass cage also offers complete compatibility with all synthetic lubricants.

The PLC 59-10 also has a two-piece brass cage and offers all the same design advantages as the PLC 59-5. This

bearing also has a high capacity design, which increases the dynamic and static load ratings. Both PLC 59-5 and

PLC 59-10 have a two-piece split outer ring, which allows for maximum rollers and a narrower inner ring.

The PLC 58-6 has a polyamide cage, which allows the bearing to be assembled so that the outer ring does not have

to be split into two pieces